Contact

Single-ply membranes

Single-ply membranes are factory-manufactured sheet membranes. They generally are categorized as either thermoplastic or thermoset. Thermoplastic materials can be repeatedly softened when heated and hardened when cooled. Thermoset materials solidify, or "set," irreversibly after heating. Single ply membranes commonly are referred to by their chemical acronyms, such as ethylene propylene diene terpolymer (EPDM).

Single-ply sheet membranes are produced using one of three manufacturing processes: calendering, extruding or spread coating. The membranes may contain reinforcement layers. Common reinforcements for single ply membranes include polyester fabrics or scrims, glass fiber, or a felt or fleece backing.

A finished sheet's thickness typically is referred to as mil thickness; 1 mil equals 0.001 inch. Common mil thicknesses for these sheet membranes range from 30 mils to 60 mils.

Single-ply membranes can be installed fully adhered, mechanically attached or held down with ballast. Most single-ply roof systems do not receive surfacings.

In many instances, a combination of attachment methods are used to secure a roof system. For instance, an insulation may be mechanically attached to the substrate with the roof membrane fully adhered to the insulation.

Click here to learn more about thermoplastic membranes, such as polyvinyl chloride (PVC) and thermoplastic olefin (TPO).

Click here to learn more about thermoset membranes, such as ethylene propylene diene terpolymer (EPDM).